Customer Service：
LUYOR Corporation
CHINA:
Phone: 4006-254-365
Fax: 021-51861392
Email: 574242291@Qqq.com
UV LAMPS inspection for NDT crack detection
NDT Wash Station UV-A blacklights are used in non-destructive testing for crack detection during the inspection stage of both fluorescent magnetic particle and fluorescent penetrant processes. They are also used at wash stations during removal of fluorescent penetrant. Defects literally jump out at the inspector due to the dramatic contrast between the bright glowing image of a defect against a dull background.
Examples include; hairline cracks in aircraft landing gear, automotive steering systems and many other safety critical components on which our lives may depend. We offer a wide range of UV blacklight inspection lamps incorporating high intensity discharge (HID) bulbs, low pressure (LP) tubes and LEDs from hand lamps and torches to light guide systems and large area flood lamps. Selection of UV LAMPS equipment should be optimised for a particular application and depends on the requirements for UV LAMPS irradiation area, UV LAMPS intensity and process integration.
Cleanroom inspectionCleanrooms and controlled environments must be maintained virtually free of contaminents such as dust or bacteria. They are used in laboratory work and in the production of precision parts for electronic or aerospace equipment. We offer a wide range of UV blacklight inspection lamps incorporating high intensity discharge (HID) bulbs and LEDs from hand lamps and torches to large area flood lamps. Selection of UV LAMPS equipment should be optimised for a particular application and depends on the requirements for UV LAMPS irradiation area, UV LAMPS intensity, process integration and ambient light levels. .
UV-A blacklights are used for inspection of conformal coatings on printed circuit boards (PCBs) to check for uniform coverage. UV blue tracer additive is incorporated within the formulation of the coating and glows bright fluorescent blue under UV blacklight. Any areas on the PCB not glowing reveals parts missed during the application of the coating e.g. conformal coatings on electronic circuitry for environmental protection and corrosion resistant metal coatings. .We offer a wide range of UV blacklight inspection lamps utilising both high intensity discharge (HID) bulbs and low pressure (LP) tubes from hand lamps and torches to large area flood lamps for checking the uniformity and correct location of conformal coatings. Selection of UV LAMPS equipment should be optimised for a particular application and depends on the requirements for UV LAMPS irradiation area, UV LAMPS intensity, process integration, ambient light levels and temperature sensitivity.
UV blacklight fluorescent inspection lamps which enable conservators to reveal evidence of imperfections, restoration and repair, to items such as paintings, paper, books and ceramics, which are not easily visible under normal lighting. Other applications include detection of forgeries, mould and enhancement of difficult to read print on paper and parchments. Selection of UV LAMPS equipment should be optimised for a particular application and depends on the requirements for UV LAMPS irradiation area, UV LAMPS intensity and ambient light levels. .
A wide range of UV blacklight fluorescent inspection lamps for filter leak detection processes. UV fluorescent additive or powder is mixed with a dust filtration system. The equipment is then operated as normal to allow the fluorescent additive to circulate throughout. Inspection under UV blacklight of all external surfaces, pipework, joints and coils will reveal leaks as a bright fluorescent glow. This process can be used for routine quality control or trouble shooting procedures and offers improved probability of filter leak detection. Selection of UV LAMPS equipment should be optimised for a particular application and depends on the requirements for UV LAMPS irradiation area, UV LAMPS intensity, process integration and ambient light levels.
Fluid Leak InspectionUV-A blacklights are used in conjunction with UV fluorescent tracer additives to quickly detect fluid leaks and pinpoint their exact source. examples of applications include hot run tests during internal combustion engine manufacture. Most of the major petrol and diesel vehicle engine, earth moving equipment and fork lift truck manufacturers are using our UV inspection lamps.
The UV fluorescent additive is mixed with a fluid system, e.g. water, oils, fuels, coolants and refrigerants. The equipment is then operated as normal to allow the fluorescent additive to circulate throughout. Where a leak occurs the UV fluorescent tracer escapes with the fluid and remains at the site of the leak and along the flow path. Inspection under UV blacklight of all external surfaces, pipework, joints, connectors, gasket seals and coils will reveal the leak location and flow path as a bright fluorescent yellow/green glow. This process can be used for routine quality control or trouble shooting procedures and offers vastly improved probability of fluid leak detection. We offer a wide range of UV blacklight inspection lamps incorporating high intensity discharge (HID) bulbs, low pressure (LP) tubes and LEDs from hand lamps and torches to light guide systems and large area flood lamps for fluid leak detection processes. Selection of UV LAMPS equipment should be optimised for a particular application and depends on the requirements for UV LAMPS irradiation area, UV LAMPS intensity, process integration and ambient light levels.
A wide range of UV blacklight fluorescent inspection lamps for hydrocarbon contamination detection processes. UV blacklights for use in conjunction with fluorescent dye penetrants and magnetic particles for highlighting defects in metals and ceramics. Examples include; hairline cracks in aircraft landing gear, automotive steering systems and many other safety critical components on which our lives may depend. Defects literally jump out at the inspector due to the dramatic contrast between the bright glowing image of a defect against a dull background. Selection of UV LAMPS equipment should be optimised for a particular application and depends on the requirements for UV LAMPS irradiation area, UV LAMPS intensity, process integration and ambient light levels.
Our LUYOR-3104 hand held flood lamp has become essential standard inspection equipment for quality control of free range eggs. It is widely used by DEFRA egg marketing inspectors, egg packing centres, wholesalers and food processors for detection of wash marks or evidence of egg washing and wiping.
Washing or wiping eggs to remove adhering dirt or foreign materials is not permitted under EU regulations. This is because the egg shell has a natural protective coating, known as the cuticle which resists the penetration of bacteria. The content of an egg is usually sterile when laid. The main cause of microbiological contamination is the washing or wiping of eggs. Wetting the shell allows micro-organisms on the shell to penetrate and multiply inside. In addition to revelation of evidence of washing or wiping, the LUYOR-3104 Hand Lamp will highlight spoilage by bacteria and mould (pseudomonas bacteria). It will also show cade marks such as two parallel lines on the egg shell. These marks would be produced when the egg is laid and hits the bottom of the cage, providing evidence against unscrupulous farmers trying to pass off caged eggs as free range.
A wide range of UV blacklight fluorescent inspection lamps for checking dispensing accuracy and uniformity of clear materials. The accuracy and uniformity of application of clear coat materials is often difficult to validate under normal lighting conditions. In order to overcome this problem, an invisible/UV revealing pigment is added to the formulation which produces a bright glow under UV blacklight. Selection of UV LAMPS equipment should be optimised for a particular application and depends on the requirements for UV LAMPS irradiation area, UV LAMPS intensity, process integration and ambient light levels. .
A wide range of UV blacklight fluorescent inspection lamps for oil and grease contamination detection processes. .Selection of UV LAMPS equipment should be optimised for a particular application and depends on the requirements for UV LAMPS irradiation area, UV LAMPS intensity, process integration and ambient light levels. .
A wide range of UV blacklight fluorescent inspection lamps for paper mixes and contamination detection processes. .UV blacklight fluorescent inspection lamps are used for revealing paper mixes and contamination not easily visible under normal lighting. Selection of UV LAMPS equipment should be optimised for a particular application and depends on the requirements for UV LAMPS irradiation area, UV LAMPS intensity, process integration and ambient light levels.
A wide range of UV blacklight fluorescent inspection lamps for particulate micro contamination detection processes.
UV blacklights for fluorescent inspection of:.
Clean rooms and controlled environments.
Surfaces prior to paint or lacquer spraying.
Non woven, medical grade textile products.
Liquid crystal displays
Selection of UV LAMPS equipment should be optimised for a particular application and depends on the requirements for UV LAMPS irradiation area, UV LAMPS intensity, process integration and ambient light levels. .
A range of UV blacklights for use with an aqueous solution of riboflavin to validate washing cycle effectiveness.
UV blacklight fluorescent inspection lamps are used in conjunction with an aqueous solution of riboflavin for wash sequence coverage validation of containment isolators used for dispensing toxic/active products. Selection of UV LAMPS equipment should be optimised for a particular application and depends on the requirements for UV LAMPS irradiation area, UV LAMPS intensity, process integration and ambient light levels.
A wide range of UV blacklight fluorescent inspection lamps for detection of ringworm. Inspection of an infected animal under UV blacklight will reveal a fluorescent yellow/green glow at the base of hairs which indicates the presence of fungi. Selection of UV LAMPS equipment should be optimised for a particular application and depends on the requirements for UV LAMPS irradiation area, UV LAMPS intensity, process integration and ambient light levels.
A wide range of UV blacklight fluorescent inspection lamps for solderflux contamination detection processes. UV blacklight fluorescent inspection lamps are used for checking effective removal of solderflux residues. Selection of UV LAMPS equipment should be optimised for a particular application and depends on the requirements for UV LAMPS irradiation area, UV LAMPS intensity, process integration and ambient light levels. .
A wide range of UV blacklight fluorescent inspection lamps for textile quality control and validation processes. UV blacklights for identification of textile material mixes, defects and contamination, which are not easily visible under normal lighting. Examples include material mixes within a cone or cloth, rogue fibres on a beam and even two wrong yarns twisted together which is seen as a spiral effect. Textile manufacturing processes such as raw material evaluation, spinning, doubling, twisting, weaving, tufting, bleaching, dying and finishing.. Identification of contamination in raw and waste materials, oil contamination in weaving or tufting and particulate micro contamination in non-woven medical grade products.
Selection of LUYOR UV LAMPS equipment should be optimised for a particular application and depends on the requirements for UV LAMPS irradiation area, UV LAMPS intensity, process integration and ambient light levels.
