LUYOR-6100 leak detection fluorescent dye

Description and Features

LUYOR-6100 leak detection fluorescent dye is a concentrated solvent soluble dye containing fluorescent dye in a high flash hydrotreated naphthenic solvent system. The product is a dark colored liquid and has been found to be completely miscible in most petroleum or organic based products. The solvent is used in the product as a viscosity depressant and standardizing agent.

Typical Uses

LUYOR-6100 leak detection fluorescent dye can be used for detecting oil leaks in gasoline and diesel engines. This application requires addition of the fluorescent dye to the engine oil and subsequent examination of the engine using a high intensity black light. Leaks are easily detected with this system by the intense white-yellow fluorescence of the dye. This fluorescence is readily distinguished from the natural blue fluorescence found in some oils.

Application Recommendations

Introduction of the dye into the engine can be carried out in one of two ways. Engine oil and dye may be premixed and added to the engine prior to the engine test or dye may be added to the engine after the oil fill by adding the dye directly into the engine sump.

 Leakage is monitored during and after the "hot-cell" test or after the dynometer test by examining the engine with a high intensity black light (LUYOR-365A emitting at 365 nm). Leakage is readily detected by the presence of a white-yellow fluorescence caused by the presence of the dye.

Recommended Dosage

The following recommendations are provided as a starting point for typical applications. Actual dosage will depend on desired color strength as well as background color of the base material. Hydraulic & Transmission: Fluids 500 to 2000 ppm Car Engine Oils: 500 ppml Diesel Engine Oils: 700 to 2000 ppm