LUYOR-3103 Inspection UV LED lamp

LUYOR-3103 Inspection UV LED lamp AC-Powered fixture.

 

Intense 365 nm AC-powered black light fixture. Contains 3 Super 365 nm Emitters > 4500 uW/cm2 at 15".

 

LUYOR-3103 Inspection UV LED lampFEATURES:

• New! AC-powered 365nm LED light fixture.

• Voltage range 90-265V ac — works in USA and Europe.

• True blacklight Alternate Light Source (no filter needed).

• Nichia high flux emitter with special lenses (not reflectors!).

• Output power density >5000μW/cm² at 15” (38cm).

• Instant startup; instant re-start.

• Beam diameter is 6x8” (at 15” working distance).

• Current-regulated drive circuit maximizes output performance.

• Air-cooled; no fan required.

• LWD 4.50” x 3.375” x 3.375”

• LED Lifetime 10,000 hours.

• Beam angle 10 degrees with no hot-spots or rings.

• Output power 3*325mW at 365nm peak.

• Shows dust and contaminants unlike any other light this size!

• Unbeatable for currency and document examination.

• 8’ power cord; pushbutton power switch on rear of unit.

INSTRUCTIONS FOR USE:

• Attach to suitable overhead surface.

• Disconnect power when installing fixture.

• Use caution to avoid direct exposure to eye.

• Yellow or clear (appropriate UV blocking eg. NoIR brand) glasses can beused.

• Not a toy — keep out of reach of children!

NDT crack detection with UV blacklights

UV blacklights for use in conjunction with fluorescent dye penetrants and magnetic particles for highlighting defects in metals and ceramics.Examples include; hairline cracks in aircraft landing gear, automotive steering systems and many other safety critical components on which our lives may depend.Defects literally jump out at the inspector due to the dramatic contrast between the bright glowing image of a defect against a dull background.

Widest range of UV-A blacklights for NDT crack detection processes from portable UV torches to flood lamps. Selection of UV-A blacklight equipment should be optimised for a particular application and depends on the following requirements:UV light irradiation area，UV light intensity，Process integration