Customer Service：
LUYOR Corporation
CHINA:
Phone: 4006-254-365
Fax: 021-51861392
Email: 574242291@Qqq.com
LUYOR-3101H 365nm Ultraviolet LED Inspection Headlamp
FEATURES:
New! Headlamp format 365nm rechargeable inspection light.
True blacklight Alternate Light Source.
Nichia high flux emitter with special lens (not a reflector!).
Output power density >2000μW/cm² at 15” (38cm).
Beam diameter is 6” (at 15” working distance).
Current-regulated drive circuit maximizes output performance.
Anodized aluminum body.
Glass lens.
Rubberized 4.4Ah Li-ion battery pack plus smart charger.
Battery pack goes in your back pocket.
Click on/off rubber tailcap switch.
Pushbutton switch on headlamp.
Many hours of use between charges.
LED Lifetime 10,000 hours.
Beam angle 10 degrees with no hot-spots or rings.
Output power 325mW at 365nm peak.
Shows dust and contaminants unlike any other light this size!
Unbeatable for currency and document examination.
Includes yellow viewing glasses.
NOTE: Available with smooth 30 degree beam for forensic photography.
INSTRUCTIONS FOR USE:
Charge Li-Ion rechargeable pack ONLY with supplied charger.
Red LED on charger indicates charging.
Green LED on charger indicates charge is complete.
Do not unscrew head.
Disconnect battery when not in use.
Headlamp flashes and shuts down when battery requires charging.
Use caution to avoid direct exposure to eye.
Keep out of reach of children — not a toy.
UV blacklights for use in conjunction with fluorescent dye penetrants and magnetic particles for highlighting defects in metals and ceramics.Examples include; hairline cracks in aircraft landing gear, automotive steering systems and many other safety critical components on which our lives may depend.Defects literally jump out at the inspector due to the dramatic contrast between the bright glowing image of a defect against a dull background.
Widest range of UV-A blacklights for NDT crack detection processes from portable UV torches to flood lamps. Selection of UV-A blacklight equipment should be optimised for a particular application and depends on the following requirements:UV light irradiation area，UV light intensity，Process integration
