Customer Service：
LUYOR Corporation
CHINA:
Phone: 4006-254-365
Fax: 021-51861392
Email: 574242291@Qqq.com
LUYOR®-UV-Panel-Light Stationary UV lamp, expandable
UV LED large area lamp for stationary use
The multifunctional UV LED large area lamps are ideally suited for stationary use with fluorescent penetrant and magnetic particle testing.
The sturdy housing is completely made from aluminium.The generated operating warmth becomes conducted away via the black anodized housing without the use of a fan. The fan-less design does not generate undesired background noise.
The UV high power UV LED's of the lamp have an highly extended service life and thus a change of the illuminants usually is not required.
The used LED's have a UV A irradiation with a strict limitation to a wave length of 365 nm. Hazard by UV B / UV C irradiation thus is nearly impossible, even with defective protection glass. The LED technique renders filter glass redundant.
Use with penetrant testing
No matter whether the inspection of parts is executed with testing media fluorescing under UV light, or whether possible cracks are subject to detection by penetrants using white light: At a push of a button the lamp changes from UV light to white light, and vice versa.
UV LED large area lamp in aKD-Check stationary system radiating white light
The same stationary system after selection of UV light
At a glance
All advantages on a view:
· Homogenous illumination
· Meets the requirements of DIN/EN 14255-1 and EN 3059
· Energy-saving by durable LED technology
· Easy to maintain
· No dangerous UVB and UVC
· Small waste heat
· Light weight
· Flexibly extendible
· Risk class 2 acc. to DGZfP EM6 and BGFE
· No start up time, after switch-on
· Low noise cooling
TECHNICAL DATA:
| White light portion*): | < 5 lx |
| Wave length (Peak): | 365 nm |
| Power supply: | 110-230 V/50Hz |
| Protection class acc. to DIN EN60529: | IP65 |
| Cooling: | Air cooler |
| Art. No. | Quantity of LED´s | Illuminated area | Picture / dimensions |
| LUYOR-3103 | 3 | app. 160x140 mm |
 |
| LUYOR-3106 | 6 | app. 250x250 mm |
 |
| LUYOR-3109 | 9 | app. 300x300 mm |
 |
| LUYOR-3115 | 15 | app. 250x500 mm |
 |
| LUYOR-3118 | 18 | app. 300x500 mm |
 |
| LUYOR-3121 | 21 | app. 250x650 mm |
 |
| LUYOR-3124 | 24 | app. 300x650 mm |
 |
UV blacklights for use in conjunction with fluorescent dye penetrants and magnetic particles for highlighting defects in metals and ceramics.Examples include; hairline cracks in aircraft landing gear, automotive steering systems and many other safety critical components on which our lives may depend.Defects literally jump out at the inspector due to the dramatic contrast between the bright glowing image of a defect against a dull background.Widest range of UV-A blacklights for NDT crack detection processes from portable UV torches to flood lamps.
UV blacklights for use in conjunction with fluorescent dye penetrants and magnetic particles for highlighting defects in metals and ceramics.Examples include; hairline cracks in aircraft landing gear, automotive steering systems and many other safety critical components on which our lives may depend.Defects literally jump out at the inspector due to the dramatic contrast between the bright glowing image of a defect against a dull background.
Widest range of UV-A blacklights for NDT crack detection processes from portable UV torches to flood lamps. Selection of UV-A blacklight equipment should be optimised for a particular application and depends on the following requirements:UV light irradiation area，UV light intensity，Process integration
